Hydraulic cylinder force & pressure
Pressure + cylinder size → push/pull force, load check, bore/pressure hint (F=P·A).
How to use
- Enter the calculation conditions
Enter the dimensions, loads, speeds or operating conditions requested by the form.
- Run the calculation
The tool applies the formulas shown on this page to the entered values.
- Review the result
Review the resulting specification and checks, then verify them against the cited source, current standard and real operating conditions before use.
Core formula
F_push = P · π/4 · D²
Example using default values
F_push = 16 · π/4 · 50² = 31,416 N (31.4 kN)
Source: F = P · A; Bosch Rexroth / Yuken hydraulic handbooks.
MINATA — minatavn.com