Tolerances and engineering drawings

Read and issue drawings correctly: fits, geometric tolerances, surface roughness, datums, symbols and the Japanese title block — with lookup tables and handbooks to download.

Start here

  1. Machine Design #29: Fits and Tolerances Using the Basic Hole System — A practical guide to reading and selecting fits by function, including clearance, transition, and interference fits and common machine-design mistakes.
  2. Machine Design #30: Geometric Tolerancing for Assembly Function — A practical GD&T guide for assembly function: choose datums, control interfaces and write tolerances people can inspect. | MINATA Practical guidance for
  3. Machine Design #31: Surface Texture: Select Ra by Function — How to choose Ra surface texture by function, contact, sealing, wear and inspection method for reliable machine parts. | MINATA Practical guidance for design,
  4. Machine Design #32: Datums and Tolerance Stack-Ups — Learn how to select functional datums, build dimensional loops, analyze worst-case variation, and design adjustment into machine assemblies.
  5. Machine Design #33: How to Specify Chamfers, C and R — A practical guide to C chamfers, R radii and drawing notes that make machining intent clear and prevent rework. | MINATA Practical guidance for design,
  6. Technical Japanese #03 — Reading Dimensions on Japanese Drawings: Numbers, Units and Symbols — φ, R, C and t decide the geometry. Read the units, the general tolerance in the title block and the machining notes before you release a part.
  7. Technical Japanese #21 — How to Read a Japanese Drawing Title Block (表題欄) — Before the dimensions, read the title block: drawing number, revision, scale, material and approval decide whether you are holding the right sheet at all.
  8. Machine Design #97: Allocate Tolerance by Function — Tight Where It Matters, Open Where It Can — MINATA guide to functional tolerance allocation: function, process, tolerance, datum, inspection, failure evidence, and maintenance checks for dependable m
  9. Manufacturing Engineering #05: How the Tolerance You Write Decides the Machining Cost — From IT7 to IT9 — Understand IT6–IT11 tolerance grades, how they map to machining methods and cost, H7/g6 fits, geometric tolerance and stack-up, plus a checklist.
  10. Machine Design #34: Drawing Checklist Before Release — A practical checklist for reviewing machine-part drawings for function, tolerances, GD&T, manufacturability, inspection, and revision control before release.

Calculators and lookup tables

Downloads

All articles in this topic (36)

Pneumatics & mechanisms · Electrical & PLC · Materials & machining · Quality · Technical Japanese

MINATA — minatavn.com

Tolerances and Engineering Drawings — Learning Path & Tables | MINATA